Ir al contenido

Cesta

La cesta está vacía

Plataforma de accesorios para cascos Bridge-Tactical

Precio de oferta€63,48
Color:Ranger Green

Agilite Helmet Bridge™ es un sistema de gestión de accesorios para cascos de talla única.

Se acabaron los días de usar cascos sencillos. El personal de operaciones especiales y de élite de las fuerzas del orden recibe numerosos accesorios para cascos, como baterías para gafas de visión nocturna, contrapesos, flashes infrarrojos, cables y más. Cuantos más accesorios le ponemos a nuestros cascos, más difícil es mantener nuestro equipo organizado, seguro y protegido.

Helmet Bridge™ es una solución completa de talla única para fijar, proteger y asegurar todos los accesorios del casco y le brinda a su casco protección adicional de la superficie.

• Proporciona protección de superficie y una solución completa de fijación de accesorios para cascos tácticos.

• Solución de funda de casco de talla única: no necesita saber el tamaño exacto, el tipo o el número de modelo de su casco ni lidiar con ningún problema de tamaño.

• Se adapta a todos los cascos tácticos comunes siempre que tengan velcro externo (si no tiene velcro externo, contáctenos en customercare@agilitegear.com)

• Le permite colocarse y quitarse todos los costosos accesorios del casco como una unidad conectada al transferir de un casco a otro o si se encuentra en un lugar propenso al robo de equipos.

• Todos los cascos balísticos tienen superficies pintadas vulnerables y el Puente ayuda responsablemente a protegerlos contra golpes y raspaduras que pueden erosionar sus propiedades balísticas.

• Retención elástica central para luces estroboscópicas infrarrojas, cámaras, etc., con perlas de retención de polímero grabadas con láser

• Canales de gestión de cables integrados

• La parte trasera del puente cuenta con un módulo universal patentado que incluye las siguientes características únicas:

• Protección de polímero semirrígido para evitar daños al casco, paquetes de baterías, bancos de energía o cualquier cosa que haya insertado en el puente cuando el casco se cae o se golpea.

- Se expande y contrae para albergar perfectamente todos los paquetes de baterías NVG comúnmente utilizados, incluidos los de GPNVG-18, AN/PVS-31, AN/PVS-23, F5050, AVS-6 y ANVIS 9.
-Orificios de salida ubicados estratégicamente para todas las salidas de cables e interruptores de energía.
- Lazos elásticos para almacenar baterías NVG AA o CR123
- Bucles de cordón elástico en la parte inferior que permiten guardar los cables de comunicación PTT cuando no se utilizan para que no queden colgando.

• Puentes entre la parte trasera, delantera y el velcro interno del casco para crear una plataforma de accesorios sólida como una roca

• También se puede usar en cascos no tácticos, como los de deportes de aventura, simplemente añadiendo velcro adhesivo, disponible en cualquier ferretería o tienda de artículos para el hogar. El puente permite añadir cámaras, baterías externas, banderas y otros accesorios.

• Peso: 152 g (5,34 oz)
• Incluye 2 opciones de tamaño de ala de serie para un ajuste perfecto.
• Materiales de especificaciones militares y herrajes de polímero
• Canales elásticos de polímero grabados a láser
• Módulo trasero universal patentado y retención central de última generación
• Presillas traseras para pilas AA y CR123 para gafas de visión nocturna
• Fabricado en Israel

• Envío gratuito a U.S para este producto (y el resto de su pedido)
• Tarifa de envío fija de $10 a toda Europa para todo su pedido

Política de devoluciones para clientes de U.SSi no está 100 % satisfecho con su compra, puede devolver el producto y obtener un reembolso completo. Puede devolver un producto hasta 30 días después de la fecha de recepción. Cualquier producto que devuelva debe estar en las mismas condiciones en que lo recibió. Si tiene alguna pregunta o desea obtener información sobre devoluciones desde fuera de EE. UU., contáctenos en customercare@agilitegear.com

  • 5 stars: 334 (94%)
  • 4 stars: 18 (5%)
  • 3 stars: 1 (0%)
  • 2 stars: 1 (0%)
  • 1 star: 0 (0%)
Z
Zach N.
Works Great

Seems to be well constructed and fits well. Happy with purchase.

J
John smith
Great product

Great product for any helmet!
Fits perfect on my galvion viper full cut.
I do wish the back pouch was fully enclosed on the bottom in order to store small medical gear without it falling out.

A
Andrew K
Top Notch (8 yr USMC vet)

This is my 2nd Agilite product and I am still impressed. Agilite gear is high quality and high function for a great price. I recommend their stuff to anyone. Will definitely be making some larger purchases this year as they've proven themselves as a terrific company. Great work, gents!

J
Joshua Mallard
Best ergonomic helmet accessory.

Added this to my recon high cut ballistic helmet, filled the need for cable management and the ability to run a battery pack and counterweight for my NVG's, install was easy and it's on there and very secure.

W
Will Dhanasunthorn
Smart Design

Fantastic design and great quality.

A
Anthony Diaz
Great product!

Just got my bridge and it fits great. Great job Agilite!!

H
H.C.
Good but long

It’s a good bridge but it is a little too long for my helmet(HHV M/L Bump).

J
Jonathan Russe
Extremely good quality!

I used it on a 3M Helmet and it works very good.

D
Daniel Wiser
Works for what I need

Works for how I wanted to set it up. However the bridge that goes down the sides of the helmet are too short..like it’s made for a small helmet ….so I took the sideways bridge off the back of the helmet and it’s too long…. I didn’t need the side bridges anyway, just the straight forward one, but if I did I’d be returning it.

C
Clint Grissom
Helmet bridge

Good quality and price once u mount it to the helmet it’s on there it’s not coming off unless u force it off so over all its a must have

W
William Wright
Awesome Helmet Accessory!

A few others recommended to get a cover or similar for my helmet and since I have a Hard Head Veterans ATE Helmet (great helmet by the way), the choices were limited. The mohawk came up a few times, but the Agilite Bridge was deemed superior.

After purchasing I see why. While it took a while to swap out the small wings for the long ones, the bridge fits perfectly on my helmet. More so, it fits tight and secure - I have no worries that it or anything on it will fall off, even during heavy use of running and gunning. I would buy this again if I had another helmet.

D
Dan Laughlin
Helmet Bridge

I got the Agilite Helmet Bridge to secure the wires of my PVS-31s. I cannot say enough about the quality of this piece. The Velcro is some of the strongest I have ever seen. The pouch holds the battery power perfectly. I am more than pleased with this and have shown everyone on my team.

K
Keith Hutcheson
Best item I never knew I needed.

The helmet bridge made all the difference in allowing me to place a marking light and counter weight on my helmet. The helmet I am issued (Armor Source Sniper Helmet) is boltless meaning it has better ballistic coverage however, it doesn’t have the traditional attachment points like other helmets. The Bridge solved this perfectly. 100% would recommend for anyone with the same issue.

R
Rodolfo-Jacob Calderon
Simple and useful for everything

I saw the bridge on YouTube and was like hmm I might be able to use that. I was kind of hesitant but I pulled the trigger got it and literally the first range I used it on was awesome I was able to put chem lights on the back and batteries and it was light and I could literally hold the Kevlar by the bungee with no worries it’s solid and cable management super easy love it.

D
David R
Helmet Bridge

I received the helmet bridge a few days ago. My use for it is Rescue/SAR activities. It seems to be a great addition to my helmet. The only issue I have is the Velcro tabs that were sent with it to secure the straps under your helmet. They were stuck to the plastic they came on and when I took them off the plastic they were not as sticky as they should have been. It seemed liked the glue on them had already been activated. They have since come loose from the helmet where I placed them. I've put them back and I'll see if they stay in place. The helmet bridge itself is fine for what I'm using it for. Marker light placement on the top of my helmet as well as holding some ESS goggles in place. I probably will not be using it with NVG's or associated batteries as it was intended. However, for my modified use, I like them. I will more than likely order another for another SAR helmet I use.

J
Juan Vega
Better than I expected!

I’ve had my eye on the helmet bridge for a few years now, I was stuck on a budget and bought a kydex battery holster but it wasn’t cutting it. I bought the helmet bridge and was impressed with the durability and the way it makes my helmet look. 10/10 recommend.

B
Brian
Extremely well made

The helmet bridge is completely stitched, even where the Velcro patch insert there is stitching. No more lost or failing glue in the field. Organized my dual comms wires and still have room for batteries or NVG weights, or battery pack. Cannot say enough good stuff. Well made

P
Pew Stick Arsenal
OD helmet bridge

Awesome system, materials are top notch (Velcro, elastic, bungee cord, stitching), and very adjustable.