Zum Inhalt springen

Warenkorb

Dein Warenkorb ist leer

Ops-Core Maritime/FAST SF Super High Cut Helmüberzug-Gen4

Angebot€69,64
Größe:

Größe

Farbe:Multicam
Nur noch 4 Artikel

• Der Gen4 ist ein Helmüberzug der nächsten Generation, der wie angegossen sitzt und dem Helm neue innovative Funktionalität und universelle Zubehörverwaltung verleiht.

• Die Gen 4-Helmabdeckung sorgt für einheitliche Farb- oder Tarnfarben, schützt die lackierte ballistische Oberfläche des Helms und dient als grundsolide Plattform, die sämtliches Zubehör sichert und so Verlust oder Beschädigung verhindert.

•Dieser extrem hoch geschnittene Helmüberzug schützt die Ballistik und die lackierte Oberfläche Ihres Ops Core FAST SF/MT, verlängert seine Lebensdauer und ermöglicht Ihnen die vollständige Zubehörverwaltung.

• Zu den Merkmalen gehören linke und rechte Kabelführungskanäle, glatte, störungsfreie Seiten und ein oberer Bungee-Zubehörverwaltungsbereich für IR-Blitzgeräte, Kameras und mehr, der über Mil-Spec-Polymerhalterungen mit lasergravierten Agilite-Skorpionen verfügt.

• Optionale Universal-Rückentasche Die Abdeckung verfügt über eine optionale abnehmbare Universal-Rückentasche, die für alle gängigen NVG-Akkus und Gegengewichte geeignet ist und über strategisch platzierte Austrittslöcher für alle Kabel verfügt. Die halbstarre Außenseite der Tasche bietet zusätzlichen Aufprallschutz für rückwärtiges Zubehör und verfügt über einen zentralen Schlaufenbereich für ID-Patches.

• Es verfügt außerdem über einen unteren Stauraum für Kommunikations-PTT-Kabel, wenn diese nicht verwendet werden. Die hintere Tasche lässt sich nahtlos in die OPS-CORE FAST SF- oder MT SUPER HIGH CUT-HELM-Abdeckung integrieren und ist fest und sicher verbunden. Dennoch kann sie in etwa 60 Sekunden angelegt und abgenommen werden, sodass Sie sie je nach Missionssatz anschließen oder abnehmen können.

• Der Agilite Gen4 Ops Core-Helmüberzug lässt sich in Sekundenschnelle einfach anbringen oder entfernen. Es besteht aus langlebigen Mil-Spec-Materialien und wurde in Israel entworfen, kampferprobt und hergestellt.

Dieser Ops Core Bump/Carbon-Helmüberzug passt auf die folgenden Ops-Core Bump-Helme:

Helm Helmgröße Welche Helmüberzugsgröße benötige ich?
Ops-Core FAST Bump High Cut Helm M/L GROSS (M/L)
Ops-Core FAST Bump High Cut Helm L/XL XL (L/XL)
Ops-Core FAST Base Jump High Cut Helm M/L GROSS (M/L)
Ops-Core FAST Base Jump High Cut Helm L/XL XL (L/XL)
Ops-Core FAST Carbon High Cut Helm M/L GROSS (M/L)
Ops-Core FAST Carbon High Cut Helm L/XL XL (L/XL)

• Gewicht: 5oz (143g)
• 1000D taktisches Nylon
• Flaches Polyesternetz 380 g/m2
• Lasergravierte Polymer-Bungee-Kanäle
• Hintere Schlaufen für AA- und CR123 NVG-Batterien
• Hergestellt in Israel
*Helmüberzug in US-amerikanischer Berry-konformer Version auf Anfrage erhältlich

Einzelheiten
• Dieser Ops-Core-Helmbezug passt auf den OPS-CORE FAST BUMP (Base Jump) High Cut-Helm und den OPS-CORE FAST Carbon High Cut-Helm.
• Präzise Passform von Agilite
• Optionale universelle hintere Zelle, passend für alle gängigen Batteriepacks/Gegengewichte
• Das proprietäre hintere Gehäuse bietet Aufprallschutz für Akkus.
• Ausgangslöcher für alle gängigen NVG-Batteriekastenkabel/-schalter
• Zentrale Bungee-Halterung der nächsten Generation mit niedrigerem Profil für IR-Blitzgeräte, Kameras usw.
• Integrierte Kabelmanagementkanäle
• Vollständige, grundsolide Zubehörplattform
• Einfache Installation – kann in Sekundenschnelle am Helm angebracht werden
• Berry-konforme Version des Gen4-Helmüberzugs auf Anfrage erhältlich

Rückgabebedingungen für Kunden – Wenn Sie mit Ihrem Kauf nicht 100 % zufrieden sind, können Sie das Produkt zurückgeben und erhalten eine volle Rückerstattung. Sie können ein Produkt bis zu 30 Tage ab dem Datum, an dem Sie es erhalten haben, zurückgeben. Jedes Produkt, das Sie zurücksenden, muss sich in demselben Zustand befinden, in dem Sie es erhalten haben. Für weitere Fragen und Informationen zu Rücksendungen von außerhalb der USA kontaktieren Sie uns bitte unter customercare@agilitegear.com

  • 5 stars: 157 (93%)
  • 4 stars: 12 (7%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
T
Timothy Blackford
High and tight

As I have come to expect from Agilite, great quality. Fits my super high cut perfectly. Comes with everything you need to fit it nice and tight to your brain bucket

K
Kai V.
My best Cover

I really love the design with the hybrid design with a fish net like material on the top and solid on the sides. It perfectly aligns with the helmet and the velcro just feels great and very durable. The rubber tensions on the top is perfect for a strobe and the little scorpion logos on the top look really nice. I also has some small cable management straps which look like they are part of the cover for the case that you don’t use them but you can just lift it and stick a cable through. I love everything about this cover i recommend it to everyone looking for a OpsCore MT cover

Z
Zachary Trujillo
Ops-Core Maritime/FAST SF Super High Cut Helmet Cover-Gen4

Helmet cover shipped fast and fit perfectly. Looks amazing as well!

d
daniel dagostino
Quality helmet cover

I bought this cover for my Custom high cut ACH with ops core arc rails fits beautifully after some slight modifications would recommend for anyone looking for a high quality helmet cover.

C
Charles Barchuk
Nearly the "Perfect" cover 4.5 Stars

Couldn't find my first review, unfortunate, so here is a follow up with the work my tailor did for me. Let me start with saying I love this cover. The reason why I gave this a 4.5 out of 5 was for two reasons and they were as follows: 1: The cover at the bottom back of the helmet was pulling up due to no center soft loop tab in the middle that you could put under the shell like in the front. This would cause the cover to pull up as seen in my picture due to the bungee when tightened. I had my tailor add a piece of velcro and problem solved. Perhaps the next generation of cover will add this? 2: The velcro on the sides for attaching national/unit/state/morale patches seemed a bit offset and out of place to me. I am a bit more familiar and acustomed to the traditional 2x3.5 so I removed the soft loop velcro myself and then brought some along with the tab for the rear of the helmet to my tailor and had the Agilite company logo reinstalled and presto change-o, I now have standard velcro on the sides. Were they a game changer... Probably not. Do I personally prefer them, yes. Agilite makes Tier 1, Great quality and I hope the pictures and my tailor do the changes justice.

C
Charles Barchuk
Nearly the "Perfect" cover 4.5 Stars

Fitment on the sides and front are great. I bought a Large for my SF Super High Cut and honestly only TWO things are in need of tailoring which I will be doing this week myself. Firstly, I will be replacing the Velcro on the sides with actual 2"x3.5" rectangular pieces to accommodate normal patches (there must be a reason for the Agilite design, I am just not in the loop) and secondly, I will raise the rear, bottom loop slot from the very bottom up higher so the cover doesn't pull away from the helmet and leave the bottom of the helmet and cover exposed to anything that can cause it to snag, cause it to damage the shell, etc. When you pull tight on the cord it starts to lift the bottom of the cover. Seems like an easy enough jib for my local tailor who does a lot of work on my gear already. Aside from those two small issues, I really like this cover.

K
K Kock
Great!

Great helmet cover! Fits nicely and is sturdy the organization on it is also top notch! 0 complaints battery pack for my pvsdual fits nicely and is not going anywhere. There is even more room left for fresh batterys for my adaptive earpro.

D
Dennis Gehrke
Fits like a glove

Bought this cover for my FMA SF helmet and it fits perfectly. Absolutly great product and would buy again for any helmet.

G
Gkounte
Ops-Core Maritime/FAST SF Super High Cut Helmet Cover-Gen4

Unique product and it fits perfectly in my helmet!

C
CJ
PGD Arch gen 3 fit

For anyone looking for a helmet cover to fit a PGD arch 3 the maritime/fast SF fits almost perfectly. For a large arch 3 you need a MED cover. For XL arch 3 you need a Large cover. Trust me I had to exchange to find this out. It’s a really tight fit, almost perfect.

מ
משה ברששת

Ops-Core Maritime/FAST SF Super High Cut Helmet Cover-Gen4

P
Pierpaolo Fraenza
Perfect

Simply perfect! The best helmet cover I ever purchase.
Thank you guys!!

ד
דוד ג.
High quality

I bought it for a different company helmet high cut and it fits great

M
Mr Curtis
Looks great

This is my second cover to purchase from Agilite. It is one of the best solutions in the market. If I have any complaint it is that the back doesn't lay 100% flat on the opscor XL version. It is probably the most snug fit you can get tho.

J
Jose ventura
Worth it.

I really like it. The product quality was wonderful and good looking.

P
Patrick Mccabe
As advertised

Fits perfectly, made out of solid material, not cheap fabric like some other covers. Multicam matches. Easy install, would highly recommend.

A
Anonymous
Great Cover

Cover looks great on helmet and provides plenty of retention points.

D
Danny Warlick
Good quality

The helmet cover was made of good quality but didn't fit my helmet and had to be returned.

G
Gio Varajas
Ops Core Maritime/FAST SF super high cut helmet cover gen4

This helmet cover is great. I bought it for my Ops Core medium Fast XR helmet. I got a medium size helmet cover and it fits it perfectly even though the helmet cover is for an SF helmet.

A
Anonymous
Perfect fit

Simple to install

J
John Gambino
Ops-Core helmet cover

great fit! love the design

I
Ivan Bautista
Gen 4 Helmet Cover

Bought the multicam helmet cover to save some money but honestly the quality was worth every dollar especially with the included retention bungee that comes attached. Top Quality item with a perfect fit

S
Shael S.
Agilite has you covered

The Agilite Super High Cut helmet cover fits great. It is super form fitting and works really well. I highly recommend if you need a helmet cover. I have many and by far Agilite is far superior in every aspect.

S
Steven Horta

Ops-Core Maritime/FAST SF Super High Cut Helmet Cover-Gen4

M
Matthieu Cassé
Bon couvre casque

Taille peut être un peu petit, j’ai pris un M pour un casque M, il manque 3/4cm mais ça ne dérange pas pour le maintien, juste pour l'esthétisme

Y
Yongjun Lee
The best cover

So durable💪